My Blog

Posts for: June, 2015

By Peter Elton DMD, PLLC
June 25, 2015
Category: Dental Procedures
Tags: crowns  
CrownscannowbemadeIn-OfficewiththeCADCAMSystem

The traditional way to restore a tooth with an artificial crown takes several weeks and multiple office visits: from tooth preparation and impression molding to crown production by a dental laboratory, followed by adjustments and cementing. Now, there’s an alternative that reduces this process to a fraction of the time, and all from your dentist’s office.

Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM) is a digital system that enables dentists to create dental restorations with laboratory-grade materials in minutes rather than weeks. As it continues to innovate, you’ll see more and more dentists investing in the new technology for their patients.

A crown restoration with CAD/CAM begins like any other with decay removal and preparation of the tooth. It diverges, though, from the traditional in how an impression of your teeth and gums is obtained: instead of rubber-like molding materials to create a physical impression, we lightly dust the mouth interior with a reflective powder. Using a scanning wand, the reflective powder allows us to capture multiple, detailed images of your mouth that the CAD/CAM computer transforms into an accurate three-dimensional model.

We use the model to first assess if the tooth has been effectively prepared for a restoration. If so, the design feature of the system will provide us with thousands of tooth forms to choose from to match with your natural teeth. You’ll be able to view the proposed size and shape of the new crown via computer simulation before signing off on the design.

Next is the actual manufacture of the crown that takes place right in the dentist’s office. A pre-formed block of ceramic material is inserted in the milling equipment where, following the pre-determined computer design, the milling heads carve the ceramic block. After milling, we fine-tune the crown surface and apply stains or glazes fired to create a life-like color and texture that matches your natural teeth. We can then adjust the crown in your mouth and permanently affix it to the tooth.

While much of the CAD/CAM system is automated, ultimate success still depends on the dentist’s expertise and artistry. CAD/CAM enhances those skills with greater precision and in much less time than traditional crowns. It’s certainly a growing option for many people to restore the form and function of decayed teeth.

If you would like more information on computer-aided dental restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Creating In-Office Dental Restorations with Computers.”


By Elton Dental Group
June 16, 2015
Category: Dental Procedures
Tags: dental implants  

Dental ImplantsFind out how getting dental implants in Gig Harbor could spell the end of tooth loss.

Looking for a solution to your tooth loss? Find out how your Gig Harbor dentist, Dr. Peter Elton can help you replace those missing teeth for good.

Replacing one tooth

If you only need to replace one missing permanent tooth then you’ll only need one dental implant. The first leg of your treatment will require us to surgically place the dental implant under the gums. Under local anesthesia, we will drill a small hole into the jawbone where the implant will then be carefully placed. Once the gums are stitched up we will give your mouth several weeks to heal.

During this healing phase, the bone and tissue surrounding the implant will begin to grow around it, making it a permanent structure within your mouth. Once this is complete, we will open the gums back up to place an abutment, or connector, on top. The abutment will then allow us to connect the artificial tooth to the implant.

Replacing multiple teeth

If you are looking to replace several missing teeth we will place that many dental implants into the jawbone, and again give the implants time to heal. Once this is complete we will uncover the implants and secure a custom dental bridge on top.

Replacing all teeth

This is very similar to replacing multiple teeth. The only difference is that instead of supporting a dental bridge your implants will support a full set of dentures. It usually takes anywhere from four to eight implants to support a full set of dentures. Once the implants are placed it will take anywhere from two to six months for the jawbone to bond with your implants. Once this has occurred, your permanent dentures can be placed. However, while the bone and tissue are bonding with your implants your Gig Harbor dentist Dr. Elton will offer a temporary tooth replacement option to wear in the meantime.

Want to find out if dental implants are right for your smile? Then schedule a consultation with your Gig Harbor dentist by calling the Elton Dental Group at (360) 362-1512. Let’s put a stop to your tooth loss!


AmericasDentistsGotTalent-forFixingDamagedorMissingTeeth

A recent episode of “America’s Got Talent” featured an engaging 93-year-old strongman called The Mighty Atom Jr. The mature muscleman’s stunt: moving a full-sized car (laden with his octogenarian “kid brother,” his brother’s wife, plus Atom’s “lady friend”) using just his teeth. Grinning for host Howie Mandel, Atom proudly told the TV audience that his teeth were all his own; then he grasped a leather strap in his mouth, and successfully pulled the car from a standstill.

We’re pleased to see that the Atom has kept his natural teeth in good shape: He must have found time for brushing and flossing in between stunts. Needless to say, his “talent” isn’t one we’d recommend trying at home. But aside from pulling vehicles, teeth can also be chipped or fractured by more mundane (yet still risky) activities — playing sports, nibbling on pencils, or biting too hard on ice. What can you do if that happens to your teeth?

Fortunately, we have a number of ways to repair cracked or chipped teeth. One of the easiest and fastest is cosmetic bonding with tooth-colored resins. Bonding can be used to fill in small chips, cracks and discolorations in the teeth. The bonding material is a high-tech mixture of plastic and glass components that’s extremely lifelike, and can last for several years. Plus, it’s a procedure that can be done right in the office, with minimal preparation or discomfort. However, it may not be suitable for larger chips, and it isn’t the longest-lasting type of restoration.

When more of the tooth structure is missing, a crown (or cap) might be needed to restore the tooth’s appearance and function. This involves creating a replacement for the entire visible part of the tooth in a dental lab — or in some cases, right in the office. It typically involves making a model of the damaged tooth and its neighbors, then fabricating a replica, which will fit perfectly into the bite. Finally, the replacement crown is permanently cemented to the damaged tooth. A crown replacement can last for many years if the tooth’s roots are in good shape. But what if the roots have been dislodged?

In some cases it’s possible to re-implant a tooth that has been knocked out — especially if it has been carefully preserved, and receives immediate professional attention. But if a tooth can’t be saved (due to a deeply fractured root, for example) a dental implant offers today’s best option for tooth replacement. This procedure has a success rate of over 95 percent, and gives you a natural looking replacement tooth that can last for the rest of your life.

So what have we learned? If you take care of your teeth, like strongman Atom, they can last a long time — but if you need to move your car, go get the keys.

If you would like more information about tooth restoration, please contact us or schedule an appointment for a consultation. You can learn more by reading the Dear Doctor magazine article “Crowns & Bridgework.”